Electric Power Fittings

  • CAPG  APG LPL copper and aluminum and  groove clamp specific form

    CAPG APG LPL copper and aluminum and groove clamp specific form

    Application:

    The CAPG parallel groove clamps are designed toconnect aluminium conductors and copper conductors.

     

    Advantages:

    1) Advanced forging technology enhances the mechanical strength of the clamp.

    2) Special designed screw hole and arc shape of thebody allow clamp to adjusts to different cable size oneach side.

    3) Materials of bolt and nut are optional depend oncustomer request. Options including Hot- dip galvanized steel and stainless steel.

    4) Pressure pad is applied to achieve uniform pressurealong the clamp.

     

  • Copper special-shaped hook clamp

    Copper special-shaped hook clamp

    Copper special-shaped hook clamp

  • series special-shaped parallel groove clamp and insulation cover (1kV, 10kV, 20kV)

    series special-shaped parallel groove clamp and insulation cover (1kV, 10kV, 20kV)

    Product function

    Parallel ditch clamps are contact fittings that connect wires in parallel to transmit electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at non-load-bearing connections in power systems, branch wires, switches, transformers and other electrical equipment leading down the wires. , The connection of the lightning protection wire grounding down wire, etc., can be completed by using the parallel groove clamp.

  • Insulating Dead End Clamp  GB   PAG

    Insulating Dead End Clamp GB PAG

    Depriciation

    Insulating dead end clamp is the fixture used to secure wire to withstand wire tension and to hang wire to tension string or tower.

    Insulating dead end clamp is used for corner, connection, and terminal connection. The spiral aluminum-coated steel wire has strong tensile strength and no concentrated stress, which can protect and reduce the vibration of optical cable. The whole set of cable tension-proof fittings includes: tension-proof pre-stranded wire and matching connecting fittings. The clamping force is not less than 95% of the rated tensile strength of the cable. It is suitable for ADSS optical cable lines with distance ≤100 m and line Angle <25°.

     

  • Insulating Dead End Clamp

    Insulating Dead End Clamp

    Depriciation

    Insulating dead end clamp is the fixture used to secure wire to withstand wire tension and to hang wire to tension string or tower.

    Insulating dead end clamp is used for corner, connection, and terminal connection. The spiral aluminum-coated steel wire has strong tensile strength and no concentrated stress, which can protect and reduce the vibration of optical cable. The whole set of cable tension-proof fittings includes: tension-proof pre-stranded wire and matching connecting fittings. The clamping force is not less than 95% of the rated tensile strength of the cable. It is suitable for ADSS optical cable lines with distance ≤100 m and line Angle <25°.

     

    Characteristics

    1) The wire clip has high strength and reliable grip strength. The grip strength of the wire clip is not less than 95%CUTS(the pulling force of the strand is calculated).
    2) The stress distribution of the wire clip to the stranded wire is uniform, without damaging the stranded wire, which improves the anti-vibration ability of the stranded wire and greatly prolonging the service life of the wire.
    3) Simple installation and easy construction. Can greatly shorten the construction time, without any special tools, one person can complete the operation.
    4) The installation quality of the wire clip is easy to ensure. It can be checked with the naked eye without special training.

  • Insulating Dead End Clamp   PA  AC   LP-D    PAL

    Insulating Dead End Clamp PA AC LP-D PAL

     

    Depriciation

    Insulating dead end clamp is the fixture used to secure wire to withstand wire tension and to hang wire to tension string or tower.

    Insulating dead end clamp is used for corner, connection, and terminal connection. The spiral aluminum-coated steel wire has strong tensile strength and no concentrated stress, which can protect and reduce the vibration of optical cable. The whole set of cable tension-proof fittings includes: tension-proof pre-stranded wire and matching connecting fittings. The clamping force is not less than 95% of the rated tensile strength of the cable. It is suitable for ADSS optical cable lines with distance ≤100 m and line Angle <25°.

     

  • SUSPENSION CLAMP

    SUSPENSION CLAMP

    Introduce

    Old-fashioned ship-shaped wire clamp: This kind of wire clamp wire, lightning protection wire can be used. It can withstand the installation load of the conductor in the vertical span, and does not allow the clamp to slide or separate from the insulator string when the line is in normal operation or when the line is disconnected. The pole tower using this clamp has a large bearing pressure.

    Function and use of pre-twisted suspension clamp: used for the connection of ADSS optical cable, OPGW optical cable, various wires, etc. in the linear pole tower, the unilateral drape angle is 15&ordm;-18&ordm;, the combination of inner and outer spiral pre-twisted wires can be very Good protection of the optical cable, no concentrated stress, avoiding bending stress, and protecting the optical cable and assisting in vibration reduction. The complete set of suspension clamps includes: inner and outer layers of pre-twisted wires, suspension heads and matching connecting hardware. The grip strength of the clamp is greater than 10%-20% of the rated tensile strength of the optical cable, which is easy to install.

     

     

  • 10KV Insulating Piercing Clamp

    10KV Insulating Piercing Clamp

     

    Product usage:  

    High voltage insulation puncture cable clamp is suitable for building distribution system T connection or connection, high voltage overhead insulation cable connection, high voltage insulation into the home cable T connection or connection, street lamp distribution system connection, ordinary cable field branch, underground power grid cable connection, lawn and flower bed lighting line connection, etc.  

     

    Performance and Characteristics  

    Insulated puncture wire clip is mainly suitable for the connection, branch connection and grounding protection of overhead insulated wire, the use of voltage class is 10KV and 1KV below, its main performance and characteristics:  

    1. Easy installation: it is not necessary to obtain the insulation layer of the wire during installation, as long as the main line and the branch line are put into the online clip according to the specified position, and the torque nut can be uniformly twisted with a socket wrench;  

    2. Small contact resistance, low temperature rise of wire clip: the characteristic torque bolt ensures constant puncture pressure, so that the wire clip and wire can achieve good electrical contact without excessive damage to the wire, and ensure the normal service life of the overhead insulated wire;  

    3. Structure sealing, high insulation: the current price is filled with thermal insulation grease inside, the whole conductor formed a fully closed structure after installation, improve the insulation strength and safety;  

    4. The wire clip is widely applicable: it can be applied to the cu-al insulated wire, the branch of reducing red guide, the docking of equal diameter wire, and is suitable for the excessive connection of cu-al insulated wire.  

  • 1kv~10kv Puncture Ground Clip

    1kv~10kv Puncture Ground Clip

     

     

    1. The puncture method is adopted to ensure the advantageous operation of the wire. 2. Ensure that the direction of puncture is consistent with the direction of force to ensure the effective use of the clamp.

    2. Safe to use:

    Anti-distortion, shockproof, waterproof, anti-electrochemical, anti-corrosion and aging.

    3. The cost performance is higher than the traditional connection method.

     

  • LP series Insulation Piercing Connectors

    LP series Insulation Piercing Connectors

    Main Technical Parameters

    型号
    Type

    等同型号
    Equivalentype

    适用导线
    Applicable Conductor Range

    标称电流 (A)
    Norminal Current

    外形尺寸(mm)
    Dimensions

    重量(G
    Weight

    螺栓数量()
    Bolt Quantity
    (Pcs)

    主线截面
    Main Line Section(mm’)

    分支截面
    Branch Line Section (mm’)

    LPO41 JJC-1 1.5-35 1.5-10

    41

    21 ×27×23

    10

    1

    LPEP JJC-2 16-95 1.5-10

    55

    27×41×62

    55

    1

    LP2-95 JJC-3 16-95 4-3550)

    157

    46×52×87

    160

    1

    LP2-150 JJC-4 50-150 6-35(50)

    157

    46×52×87

    162

    1

    LP3-95 JJC-5 25-95 25-95

    157

    50×61 ×100

    198

    1

    LP3-120 16-120 16-120

    214

    50×61×100

    198

    1

    LP4-150 JJC-6 50-150 50-150

    316

    50×61 ×100

    280

    1

    LP6 JJC-7 120-240 25-120

    276

    52×68×100

    360

    1

    LP7 150-240 10-25

    102

    52×68×100

    336

    1

    LP240 JJC-8 95-240 95-240

    425

    83×130×130

    1020

    2

    LP300 LP9 95-300 95-240

    425

    83×130×130

    1040

    2

    LP400 LP9 120-400 95-240

    425

    83×130×130

    1050

    2

     

    绝缘穿刺线夹概述/General of Insulation piercing Connector

    Piercing connector,simple installation,need not strip the cable coat;

    Moment nut,piercing pressure is constant,keep good electric connection and make no damage to lead;

    Self-seam frame, wetproof, waterproof,and anti corrosion, extend the using life of insulated lead and connector;

    Adopted special connecting tablet apply to joint of Cu(Al)and Al;

    Small electric connecting resistance,impulse current can be up to 15KA;

    Special insulated case body,resistance to illumination and environmental aging,the insulation strength can up to 6KV.

    Arc surface design,apply to connection with the same (different)diameter,wide connection scope(l.5-240m).

     

    产品性能实验/Performance Testing

    Mechanical performance:the gri force of the wire clamp is 1/10 bigger than the break force of the lead. lt comply with GB2314-1997;

    Temperature rise performance: Lunder the condition of big current,the temperature rise of connector is less than that of connection lead;

    Heat circle performance:200 times per second, 100A/mbig current,overload,the change of connection resistance is less than 5%;

    Wetproof insulation performance:under the condition of S02 and salt fog,it can do three times of fourteen days circle testing;

    Environmental aging performance:under the circumstance of ultraviolet.radiation,dry and moist,expose it with change of temperature and heat impulse for six weeks.

     

    为什么要选择绝缘穿刺线夹(IPC)/The Reason Of Shoosing Insulation Piercing Connector(IPC)

    Simple installation

    Can be branch of cable without striping the insulated coat and the joint is completely insulated,Make brance in the random location of cable without sutting off the

    main cable Simple and reliable installation,just need sleeve spanner,can be installed with on live line;

    Safe use

    The joint has good resistance to distortion,quake fire wet,electrochemical corrosion and aging,need no maintenance,Has been used successfully for 30years;

    Economical cost

    Small installation space save the cost of bridge and land construction In structural application ,there need no therminal boxjunction box and return wire of cable

    save cable cost,The cost of cables and clamps is lower than other power supply system.

     

  • Sales of flame-retardant and fire-resistant piercing clamps

    Sales of flame-retardant and fire-resistant piercing clamps

    Fire-resistant flame-retardant insulation piercing clamp
    *Used for the branch connection of insulated cables of building power distribution system, low-voltage overhead insulated cable connection, low-voltage insulated household cable branch, street lamp power distribution system, etc.
    *Main line: insulated copper and aluminum.
    * Branch line: insulated copper and aluminum.
    *Can be operated with electricity or power failure.
    The main body of the piercing clamp is made of high-strength, mechanical and weather-resistant insulating materials.

  • Insulation Piercing Connector PC-150

    Insulation Piercing Connector PC-150

    The JBD insulation piercing connectors are applicable for the low voltage aerial cables. These connectors are used to establish T-connections and Joint-connections. Connection of main line is established by insulation piercing without stripping of insulation. Connection of tap line is established by insert tap conductor into the bore after stripping of insulation. Shear head bolts applied for both connections.

12 Next > >> Page 1 / 2